This patented sewer pipe invert and diameter measuring tool allows accurate measurements without going down in a manhole. Also allows offset measurement.
PIPE MIC II
NEVER GO INTO CONFINED SPACES AGAIN!!
MEASURE PIPE INVERTS AND SIZES FAST, EASILY, &
ACCURATELY FROM THE SURFACE
With the emphasis today on, “confined space safety”, It is becoming more and more important not to go down into manholes unless absolutely necessary.“ChrisNik”, the Ohio based company with a reputation for high quality products and a nak for coming up with just what the doctor ordered, has done it again with the “Pipe Mic II.A beautifully simple, durable, lightweight tool to measure pipe inverts and sizes, easily and accurately from the surface.
Measurements are more accurate because measurements are made with a vertically plumb rod.
Unit slips easily onto a standard SVR or USL rod. No tools needed.
Made of light weight, non rusting aircraft aluminum,
24” measuring arm can be extended to 36” by simply adding the optional 1 ft. extension. $69.95
Ingenious round foot design slices through material at bottom of pipe to insure accurate invert and pipe diameter measurement.
NO BATTERIES, NO LASERS, NO MAINTENANCE
To use: * You can direct read the depth of the invert when the pin is set at "zero offset" on the PIPE-MICII. * If you need clearance under rod to measurement an invert move the pin to "1' vertical offset hole" * If you need clearance under rod and a pipe that is hard to reach you can add a 1 ft. extension. (1 ft. extension sold separately) Move pin to " 1' vertical offsetw/ 1' extension" hole. To size a pipe: The foot is 0.33 or 4". Take the reading from the rim, pull up and take reading plus 0.33 and that is your pipe size.
