High sensitivity sensor with Neodymium magnet sensor and cable connection completely sealed and water-proof
Amplifier with superior audio quality (very low distortion and superior signal-to-noise ratio). Large meter display. Press the mute switch to hear sounds when you are ready.
"Survey" for water leaks by listening at hydrants and valves with the sensor and magnet. Survey at water meters with a long contact rod (optional)
Pinpoint water leaks in pipes under asphalt or concrete with the base plate attached to the sensor and magnet.
Use the High filter range for water leak surveying. Use the Low filter range for water leak pinpointing. High frequency leak sounds travel on the pipes, but only low frequencies pass through the soil.
Specifications: Amplifier Amplification 56dB
Filter Ranges 1) High Range 30Hz to 5000Hz
2) Low Range 30Hz to 800Hz
3) Notch Filter 150Hz - 180Hz
Power: 4 C dry cell batteries
Battery Life: 80 hours with alkaline batteries at 68 degrees F.
Weight: 31 Ounces (including 4 C batteries) Size: 6.4" x 3.0" x 5.7"
Sensor: Sensitivity 10V/g Resonance Frequency: 950 Hz (+or- 150Hz)
Weather protection: IP68 or equivalent(3ft under water for 3 hours)
Cable Length: 9.75ft
|
Manufacturer:
N/A
|
| SKU: |
N/A
|
